Some of you have been asking for this for a long time. And now it is finally here! A 3W VHF TV transmitter is your ticket into the world of TV. Build your own TV studio and broadcast your own TV program! Transmit movies from your PC to your living room, re-transmit the TV program you've never been able to receive in your valley, run a college TV station, cover rural areas of Africa with TV signal from satelite stations, run a hotel cable system info pages or just have fun... this unit will keep you busy during the cold winter evenings and is sure to provide lots of fun for many months to come!
Manual is here:
http://www.pcs-electronics.com/software ... 000_en.pdf
Product listing:
https://www.pcs-electronics.com/product ... tter-kits/
General features:
- Standard 19" rack 1HE high
- Modular construction
- Built-in CPU for controlling and monitoring
- Easily adjustable TV channel (via LCD module)
- Easily adjustable TV and sound standard (via LCD module) and other parameters
- Built-in test signal generator
- Supports all world TV standards: All PAL versions, SECAM, NTSC
- SWR protection
- Stereo sound possible with plugin board
- Friendly user interface
- Output power: 5W typ (typically 5W-7W), adjustable from 0 to Pmax via LCD display
- Output impedance 50 Unbalanced, VSWR less than 2:1 for full output
- Output connector BNC female ( rear panel )
- Frequency range: TV VHF band, top end (around 175-225MHz, ch 7-12 in EU)
- Audio connectors: RCA (cinch)
- Audio level: 1Vpp
- Video level: 1Vpp
- Audio input impedance: 10K resistive, unbalanced
- Pre-emphasis 50 or 75usec
- RF Spurious: -80 dBc @ +- 1MHz min. out of carrier
- RF Harmonics: -50 dBc Standard
- Voltage power supply DC 15V/2A
- External rack dimensions ( W x D x H ) 19" x depth (170mm) x height 1HE (44mm)
- Weight rack 2.5kg, board 0.32kg