CYBERMAXMICRO+ (v30)

[pcs]

NOW WITH REMOTE CONTROL VIA USB OR RS232 AND MANUAL RDS SUPPORT VIA LCD MODULE!

This unit is a real eye-candy. With 2x10 BARGRAPH LED VU meter and backlit LCD display wrapped up in a tiny and stylish black anodized enclosure this unit really draws attention. But CyberMaxMicro+ (V3) is not just about the looks, this jewel packs a lot under the hood, too. And now finally with hot new feature, remote control via PC; you can now set frequency, output power, stereo/mono mode and any of the RDS parameters right there on your desktop. USB or RS232 cable is all it takes. Another hot feature lets you set and change RDS parameters via unit's LCD control, eliminating the need for a computer for changing RDS settings. You can enter PS, RT and a number of other parameters right there on the LCD module.




Here is the manual for v30:
http://www.pcs-electronics.com/software ... v30_en.pdf

Here is the driver for v30, lets you change RDS parameters and frequency/output power and stereo / mono mode.
http://www.pcs-electronics.com/software ... v40_en.exe

Enjoy this latest release from PCS!

[pcs]

Added manual, link is above.

[Dreammachine-Radio]

For those who want to use the cool IO board with PCS software to update RDS and our power and frequency settings via USB or rs232 cable, please note that each setting you do in the PCS program, you need to push the button UPDATE TX. ( right site on the program screen) to effect the settings into your CYBERMAXMICRO+ (v30).

[pcs]

One customer reported this error in VISTA:

Hi!
I am very pleased with my new CyberMax Micro 1W FM-transmitter, but the software that was included in the package does not work on my PC. I run Windows Vista. When I try to start the program, it says:

---------------------------
CyberMaxMicro v3.0
---------------------------
Component 'mscomctl.ocx' or one of its dependencies not correctly registered: a file is missing or invalid
---------------------------
OK
---------------------------

Is this a known problem, and is it a fix to this problem?

I believe this is the solution:
http://www.vistaheads.com/forums/micros ... basic.html

Install that exe file, it installs common VB libraries and eliminates the error.

[pcs]

And here is the driver for USB IO board for XP, W2K and Vista

http://www.pcs-electronics.com/software ... driver.zip

This lets you use the USB communication with cybermax micro.