pci max trans. amps, and freq.

plutonium233 · Post by **plutonium233** » Sun Feb 01, 2004 2:38 am

I am plannning on purchasing the pci max fm transmitter and I have a couple of questions. Is it possible to change the frequency range outside of the preset, and if so is is changed by software or hardware. I saw in another post that the FCC generally turns a blind eye to transmitters under 5 watts that don't interfere with other stations, I live in a very rural, pretty wooded area of the U.S. and don't plan on broadcasting a whole lot. There are no more than 8-10 stations that come in on the FM band here either. If I use the 5 watt transmitter, keep a faily low profile, and not interfere with other stations can I get away with it?

Thanks,
Kyle

Noble Radio · Post by **Noble Radio** » Sun Feb 01, 2004 8:12 am

The PCI Max software controls both the on/off of the PCI Max card and what frequency you transmit on.

plutonium233 · Post by **plutonium233** » Wed Feb 04, 2004 1:02 am

Just letting you all know, if anyone can answer my question, i havn't disapeared. In response to the above post, I mean can there be a frequency selected outside of the ~87-108 range.

Thanks in advance for any help.

Post by **pcs** » Wed Feb 04, 2004 2:50 am

It could be, if you changed the program. But you could get in
trouble by disturbing other services. It is a serious matter.

plutonium233 · Post by **plutonium233** » Thu Feb 05, 2004 12:25 am

One more question, if I were to use a frequency that I could verify it didn't interfere with others would it be ok or is it just a bad idea to broadcast outside of the preset range.

Thanks,
Kyle

Post by **pcs** » Tue Jul 20, 2004 9:53 am

I really can't recommend it.

PCS-Electronics

pci max trans. amps, and freq.

pci max trans. amps, and freq.

i'm still here

thanks