VU MAX 1, 4 channel VU meter

Post by **pcs** » Mon Jun 02, 2008 1:00 am

https://www.pcs-electronics.com/shop/st ... -vu-meter/

Its an add-on for stereo encoders. 2 of the bargraphs serve to show audio
level, the other two can be set to show any voltage present inside the case,
such as output power and SWR for example.

Here is the manual:
http://www.pcs-electronics.com/software ... ax1_en.pdf

Enjoy!

Post by **pcs** » Mon Sep 08, 2008 9:43 pm

Added a link to the manual and updated pics.

bmw4797 · Post by **bmw4797** » Wed Feb 08, 2012 11:39 am

warum ist nicht kompatibel mit der Max Pro 5040;

Post by **pcs** » Wed Feb 08, 2012 1:03 pm

It is compatible to the 5015, 25 and 40.

bmw4797 · Post by **bmw4797** » Thu Feb 09, 2012 11:20 am

wie verbinden das?? gibt es einen Plan,
wie Sie eine Verbindung herstellen können

Post by **pcs** » Thu Feb 09, 2012 11:35 am

The 5 pins go directly to the VU-MAX header on MAX PRO exciter.

The other 3 pin usually go to stereo encoder SE5000, SE2000, SE 3000 or SE 6000 to get stereo signal (there are two bars for left and right channel).

Its very simply really.

bmw4797 · Post by **bmw4797** » Thu Feb 09, 2012 11:09 pm

so tat ich, und wird nicht funktionieren,
Nach dem Einlegen der Pin Lichter für eine Weile, nachdem ab

Post by **pcs** » Fri Feb 10, 2012 1:03 am

Make a nice photo and let me see it.

Did you check the trimmer positions?

PCS-Electronics

VU MAX 1, 4 channel VU meter

VU MAX 1, 4 channel VU meter

nicht kompatibel vumax1-meter