Page 1 of 1

How to test for Tilt Correction on the PCI MAX 3000+

Posted: Wed Mar 06, 2013 8:08 pm
by BriansBrain
Hello,

I am interested in getting a PCI MAX 3000+ 8)

I use Breakaway Broadcast as my sound processor :wink:

I want to use the PCI MAX's on-board sound card to have direct digital audio streaming with reduced noise.

But :roll:

How or where do I obtain an audio output to do the Tilt Correction test using 60hz Square Wave.
Instuctions here >>> http://www.claessonedwards.com/index.ph ... &Itemid=67

Image

I have Oscilloscopes, two of these actualy...

Image

I also have some qualifications in electronics engineering :lol:

Thanks in advance.

BB.......... 8)

Posted: Thu Mar 07, 2013 8:51 pm
by pcs
Do you see the LED diodes? On one side of both groups of LEDs you have full access to LEFT and RIGHT channel.

Or did you want access to MPX?

Posted: Fri Mar 08, 2013 1:28 pm
by BriansBrain
pcs wrote:Do you see the LED diodes? On one side of both groups of LEDs you have full access to LEFT and RIGHT channel.
OK :wink:

Thanks for the info :D