Page 1 of 1
PCIMAX 2007 3% TO 7% HOW TO
Posted: Fri Nov 04, 2011 8:22 am
by radiocity1028
PCIMAX 2007 HOW TO MOVE THE STEREO pilots from 3% to 7% NOW IN THERE ANY PLAN MEASUREMENT AND I HAVE MADE MY SHOWS 3% AND I WANT TO UPLOAD THE ABOVE change anything on the board PLEASANT WAIT ANSWER
Posted: Fri Nov 04, 2011 11:10 pm
by pcs
Looks like your caps lock key is stuck
First, are you sure your stereo pilot is too low?
Second, email me directly and I'll make you a pdf showing where to change a resistor.
Third, it is really time to upgrade to PCIMAX 3000+.
The difference between the two boards is really huge and it is really worth the upgrade.
radiocity1028
Posted: Mon Nov 21, 2011 11:00 pm
by radiocity1028
Re: radiocity1028
Posted: Wed Nov 23, 2011 8:18 pm
by radiocity1028
sen me a pdf how change a resistor my email is
radiocityfm1028@gmail.com
Posted: Thu Jan 26, 2012 1:23 pm
by berrall
Added a 330k in parallal with the existing one on my card and it brought the pilet level to 6.6khz (9%). Before the change the level was at 4.5khz and was having trouble with one of my tuners dropping to mono occasionally.