Page 1 of 1
SAM BROADCASTER VERSION 4.2 DO NOT WORK WIT PCIMAX2007+
Posted: Wed Jun 10, 2009 8:14 pm
by dpineyro100
HI,ADMINISTRATOR
I GOT MY PC1MAX2007+ FROM PCS ELECTRONICS AND I HAVE PROBLEM TO WORK WITH SAM BROADCASTER VERSION 4.2
Error: Cannot open WinDriver device at the bottom of the Ulta Window in SAM BROADCASTER V4.2
PCS advised me to run the 2004 driver and it works quite well better than have no driver obivousl.
When I test the power light on the card never work with SAM Broadcaster PCI Max Ultra.
Only work with when I running pcimax2007 Icon. Please I need this card work with my SAM Brodcaster application.
I install_pcimax2007_v10_XP_en.exe and i have the same issue.
My location is on Freeport,New York USA
Thanks!
Danny Pineyro
Posted: Wed Jun 10, 2009 8:41 pm
by pcs
Dear Danny,
the only difference is where you set frequency.
Whether this is done with the SAM or our driver
makes absolutely no difference in sound quality
or output power.
Posted: Wed Jun 10, 2009 8:52 pm
by dpineyro100
DEAR ADMINISTRATOR,
OUTPUT POWER IS MY ISSUE WHEN I USE SAM BROADCASTER PCI MAX ULTRA THE SIGNAL FAIRLY 100%,I USED THE PCIMAX2004 DRIVER TO FIX THE ERROR CANNOT OPEN WINDRIVER DEVICE ON SAM BROADCASTER V 4.2 BUT THE PCIMAX2007+ POWER INDICATOR LED IS OFF ALL TIME,FOR THAT THE SIGNAL IS OFF.
PLEASE HELP ME WITH THIS MATTER BECAUSE ALL MY RADIO PROGRAM IS RUNNING WITH SAM BROADCASTER V 4.2 APPLCATION
THANKS!
DANNY
Posted: Wed Jun 10, 2009 9:01 pm
by pcs
Above you said the pcimax 2004 driver is working fine. So you can use that
driver to set power, frequency etc.
Use sam to play audio and everything is perfectly ok.
Posted: Wed Jun 10, 2009 9:15 pm
by dpineyro100
Mr.Administrator
When I set power and frequency on SAM the power indicater led still off, for that i can broadcasting any signal.
thanks! again for you help.
Posted: Wed Jun 10, 2009 9:20 pm
by pcs
Don't set it in SAM, set it with our driver.
Posted: Wed Jun 10, 2009 9:28 pm
by dpineyro100
Mr.administrator
That mean, I can no send audio direct from SAM to PCImax2007 and I have to use my output audio card to audio input on pcimax2007+.
Posted: Wed Jun 10, 2009 9:40 pm
by pcs
Nope, that is not the case.
Audio is streamed through audio cable from your sound card
to the pci max card. Audio cable is included.
Posted: Wed Jun 10, 2009 9:43 pm
by dpineyro100
Mr.Administrator
I received my PCIMax2007+ LPFM.
QUESTION
RDS PARAMETERS IS DISPLAYED,THAT MEAN THIS CARD HAVE THE RDS BOARD INTEGRATED.
THANKS
DANNY
Posted: Wed Jun 10, 2009 10:09 pm
by pcs
Only if you ordered the RDS daughter board.
Posted: Wed Jun 10, 2009 10:37 pm
by dpineyro100
Mr.Administrator
Thanks you very much, for you help.
Posted: Thu Jun 11, 2009 11:35 am
by pcs
You are very welcome.