Page 1 of 1
PCIMax 2007 and Speaker Output
Posted: Sun Dec 14, 2008 6:15 am
by herculee
Just got my PCIMax 2007 installed and I can't figure out how to output stereo (left/right speaker) sound. When I listen to the output on the radio I only hear sound out of one channel. I even tried plugging the PCIMAX cord into the headphone jack and I still only get one channel.
Posted: Sun Dec 14, 2008 1:52 pm
by Dreammachine-Radio
In your PCI software select the button mono stereo.
PCIMax Settings
Posted: Sun Dec 14, 2008 2:40 pm
by herculee
One of the three buttons at the top? It is already set to Stereo.
Posted: Sun Dec 14, 2008 2:56 pm
by Dreammachine-Radio
Did you try also:
1. connect sound from mp3 player, or other stereo device
2. connect sound from soundcard pc
3. make sure your output sound device has a stereo female plug.
4. another cable
When connecting stereo cable into a mono female its results in only one chennael sound, mostly left channel.
PCIMax 2007
Posted: Sun Dec 14, 2008 3:08 pm
by herculee
Thanks! I am using the integrated sound card. Does the cord go in the black, yellow, or green marked plugged on the pc?
Posted: Sun Dec 14, 2008 8:44 pm
by pcs
Usually green, although this can vary from pc to pc
as outputs are configurable.