PCS-Electronics

Hello,

In the doc, the power at the input of the 150W amp it s only 1W. I can up this value to 1.5 W or 2 W ? Without overdrive the PA for get a bit of power in outpout (160 170 W)

Thanks !!!

Extremely easy, just use this:
https://www.pcs-electronics.com/product ... tenuators/

For example 3dB attenuator:
3dB attenuator (2W-1W)

You put 2W at the input and 1W comes out. The rest is turned into heat.

150W amp needs 1-1.5W to reach full output power.