Page 1 of 1
Level audio MaxPro 3+
Posted: Tue Jun 19, 2007 9:41 pm
by arg12345
Please, I have MaxPro 3+ and I observe that when increase a little the level of audio, the emission cuts seconds.
There is some form of which the emission is not cut?.
Thanks. A greeting.
Posted: Wed Jun 20, 2007 1:08 pm
by pcs
1:) Use limiter / Audio processor
2.) Read manual, there is a section dedicated to disabling PLL unlock test.
Posted: Thu Oct 23, 2008 8:34 pm
by Mustang7172
A limiter Compressor is expensive. I have found a program on Winamp.com. If you download the winamp media player. Go to Plugins menu. There will be a catagory list. Click on DSP. Find Sound Solutions version1.1. It looks like it has teeth and claws, but the initial setup sounds the best. Just keep the audio level down below 0db. shoot for -3db. Sound solutions is the best if you have no budget, I found this to be the best. Also Compressor widener has a Compressor on it. Just turn off stereo enhancer, and you'll do good. There are other programs with 15 day trials on them. I am running Breakaway, it cost 30 dollars, but is the best Sound out there. Breakaway works in conjunction with your sound card. You can use any, and I mean any media player with it.