PCS-Electronics

I arrived home the this afternoon, flicked on my Cyber Max FM 15W, then these things happened:

1. The two lights (power, swr) flicked on for a split second then became dimly lit
2. The power supply light almost completely went out, showing an unbelievable amount of current draw.
3. The setup just stayed like this!

I tested a different power supply, no luck
I inspected the MAX PRO 3+ on top and underneath, no problems to the best of my knowledge
I removed lcd module, still no luck.
Fuse is not blown

Your help is much appreciated
Thanks

Email me directly, use contact us at our website.

Do some hires pics of tx interior for me while waiting for a reply from me, ok?

Thanks for that, I'll do that tonight when i get home. (Morning your time)

Sorry if the images aren't the best quality, I can try and get a better camera if you wish.
Thanks very much for taking a look

[edit by pcs: Thanks, got it, now removing the pics]

OK, can you remove the heatsink for me and check if there is any damage to the output transistor?

Marko

Sorry Marko, bear with me I'm on dial-up

There doesn't appear to be any damage, all the soldering appears to be in order I have uploaded an image of it in case you can see anything wrong with it



Thanks

Sorry Marko but I'm going to have to retire (It's the middle of the night over here in oz) so if you can think of anything in the meantime can you post it please and I'll get back to you tomorow.
Cheers