Page 1 of 1
comet antenna manual.. here it is, help!!!
Posted: Wed Feb 12, 2003 8:18 am
by yahta
ok i see this , im not sure how to read the element slide chart that shows howto adjust , is it showing that full extention at 900mm is 110MHZ? and 400mm is 88MHZ? please help , let me know someone , help me get a idea ,thank you
http://www.visradio.com/dwg/ncg/cfm-95sl.gif
Posted: Wed Feb 12, 2003 8:08 pm
by znight
you read the chart wrong. 900mm is 88mhz range (full extension). and 400mm is 110mhz (which you will never use). So for example, if I were to operate at 100.1mhz, the length of the upper element would be about 600mm.
Posted: Thu Feb 13, 2003 2:21 am
by zael
I just sent you a better manual for your comet antenna to your email.
this one will help you.
zael.
Posted: Thu Feb 13, 2003 5:32 am
by yahta
which manual should i use , the PDF shows 2 manuals! slightly different , please let me know , thank you
Posted: Thu Feb 13, 2003 8:13 am
by zael
good question, I use the hose band model, which is the first in the pdf, and it seems to be like the manual you have.
zael.
Posted: Thu Feb 13, 2003 7:45 pm
by yahta
ok i adjusted it accordingly and my signal is alot stronger now , i would need to purchase a SWR meter for fine tuning ,i am getting 10 miles clear! and 15 cutting in and out.. which i will do later this week. thanks for your help.
Can you send a copy of that manual to me too please ?
Posted: Fri May 30, 2003 6:31 am
by quantumradio
zael wrote:I just sent you a better manual for your comet antenna to your email.
this one will help you.
zael.
Hi,
I understand the gif image the other chap had listed, but would appreciate a more indepth manual if at all possible?
Thanks much if you can
Robert
Posted: Sat May 31, 2003 10:04 am
by marek
yahta wrote:which manual should i use , the PDF shows 2 manuals! slightly different , please let me know , thank you
Could I get that manual too? I think the antenna works fine now, but if it can be even better then... well, you know
Posted: Tue Jun 03, 2003 1:00 am
by zael
Posted: Tue Jun 03, 2003 11:40 am
by marek
The page or file didn't existed... at least at this time.
Posted: Wed Jun 04, 2003 5:56 pm
by zael
ok, I have the file in this ftp directory too:
ftp://toplevel.d2g.com/incoming/JoseLuis/
good luck.
Posted: Thu Jun 05, 2003 3:10 pm
by marek
Which hours is this server online? I couldn't connect to it when I tried today.
Marek
Posted: Thu Jun 05, 2003 7:54 pm
by marek
Ok, it's up now. I adjusted it and it was around 5 cm less than it should. The result was good. Thanks for putting it on your site.
Posted: Thu Jul 20, 2006 10:35 am
by faf-x
Hello !
Can somebody send me COMET user manual by email please ??
I have lost mine
Thank you !
Posted: Thu Jul 20, 2006 11:43 am
by pcs
Posted: Thu Jul 20, 2006 1:38 pm
by faf-x
thank you...
I search one with a good graphic like the original manual :p !
but it will be good !
