PCI MAX 2006+ is arriving!
Posted: Sun Nov 06, 2005 4:41 pm
You can read more about it here:
https://www.pcs-electronics.com/shop/pc ... tter-card/
What is new since PCI MAX 2005?
PCI MAX 2006+ is a major design upgrade from the PCI MAX 2005. We really took our time with this version. We started by analyzing any reported problems with the previous models and we considered various ideas for improvements submitted over the years by the users. We implemented some major changes plus a number of small, but effective improvements was made, ensuring excellent audio quality and great stereo separation. Some of the improvements (not all) are listed below:
- External power supply connector moved to the back for easy access (for those with noisy PC power supplies or perfectionists trying to get the most out of their PC based FM transmitter system.
- All boards are prepared for RDS, a daughter board is simply plugged in (this could only be done in our laboratory before). Besides, the mounting of RDS board is now much more elegant.
- Additional RF stage for increased isolation (stability) and more RF power (~350mW & 1W versions available). Low power version will be noticeably stronger than the old 2005 cards.
- A LED diode at the PC backplate for transmitter power indication, it makes it possible to check whether transmitter is ON or OFF (and what the power level is). Its very handy for troubleshooting and looks good, too.
- DC/DC convertor is now synchronized with stereo encoder, which eliminates interference problems.
- Power adjustment circuitry has been redesigned entirely and now performs much better.
- A trimmer lets users set maximum adjustable power (to say 0-50mW or 0-250mW)
- PLL loop filter was redesigned for better audio quality
- 15KHz low pass filter was added (this was really needed as it sounds much better now).
- Improved PCB layout
- An optional external box will be provided as well as miniature LCD display board with VU meter (2x5LEDs)
- 50KHz PLL steps
This is a more/less complete list.
We will be releasing PCI MAX 2006+ on December 1st! RDS daughter boards are expected to arrive 1-2 weeks after PCI MAX 2006+ and can be shipped later and easily installed by the customer.
SAVE 20 EURO BY ORDERING NOW !
We are now taking pre-orders for PCI MAX 2006+. You can order now and save 20 Euro (cards will be 20 Euro more expensive when they start shipping on December the 1st).
This pre-release price rebate (20 euro) was established to reward all
those patiently waiting for the new model.
We will be selling boxes and minuature LCD display units, which together make for an attractive, small and feature rich stand-alone stereo (maybe even RDS) transmitter.
More details as the release date approaches.
https://www.pcs-electronics.com/shop/pc ... tter-card/
What is new since PCI MAX 2005?
PCI MAX 2006+ is a major design upgrade from the PCI MAX 2005. We really took our time with this version. We started by analyzing any reported problems with the previous models and we considered various ideas for improvements submitted over the years by the users. We implemented some major changes plus a number of small, but effective improvements was made, ensuring excellent audio quality and great stereo separation. Some of the improvements (not all) are listed below:
- External power supply connector moved to the back for easy access (for those with noisy PC power supplies or perfectionists trying to get the most out of their PC based FM transmitter system.
- All boards are prepared for RDS, a daughter board is simply plugged in (this could only be done in our laboratory before). Besides, the mounting of RDS board is now much more elegant.
- Additional RF stage for increased isolation (stability) and more RF power (~350mW & 1W versions available). Low power version will be noticeably stronger than the old 2005 cards.
- A LED diode at the PC backplate for transmitter power indication, it makes it possible to check whether transmitter is ON or OFF (and what the power level is). Its very handy for troubleshooting and looks good, too.
- DC/DC convertor is now synchronized with stereo encoder, which eliminates interference problems.
- Power adjustment circuitry has been redesigned entirely and now performs much better.
- A trimmer lets users set maximum adjustable power (to say 0-50mW or 0-250mW)
- PLL loop filter was redesigned for better audio quality
- 15KHz low pass filter was added (this was really needed as it sounds much better now).
- Improved PCB layout
- An optional external box will be provided as well as miniature LCD display board with VU meter (2x5LEDs)
- 50KHz PLL steps
This is a more/less complete list.
We will be releasing PCI MAX 2006+ on December 1st! RDS daughter boards are expected to arrive 1-2 weeks after PCI MAX 2006+ and can be shipped later and easily installed by the customer.
SAVE 20 EURO BY ORDERING NOW !
We are now taking pre-orders for PCI MAX 2006+. You can order now and save 20 Euro (cards will be 20 Euro more expensive when they start shipping on December the 1st).
This pre-release price rebate (20 euro) was established to reward all
those patiently waiting for the new model.
We will be selling boxes and minuature LCD display units, which together make for an attractive, small and feature rich stand-alone stereo (maybe even RDS) transmitter.
More details as the release date approaches.
