Page 1 of 1

Cyber Max FM 150W Breakdown / Comparison

Posted: Sat Jul 23, 2005 3:31 am
by CaLLe
Dear Sir Nigel or PCS,

First of all congrats on a great website and forum! Found it yesterday and loving it. =D>

I am in hopes of setting up a small FM station :D I am trying to keep costs as low as possible but at the same time have a quality signal (who else on this forum isn;t?)

Anyway here I go:

a) If I purchase the following to assemble, would it be close to a Cyber Max FM 150W:
Max Pro I
150W Amplifier (w/power supply)
Low Pass Filter
Stereo Encoder

b) What components am I missing?
c) Would it be cost effective?

All sugestions welcomed.
Thank you sirs.

Posted: Mon Jul 25, 2005 5:23 pm
by Sir Nigel
I think it would be similar, just the Max FM has some control options built in and it is supposed to be more professional.

BTW, I don't run this place, PCS (aka Marko) does. :)

Thank you.

Posted: Wed Jul 27, 2005 1:51 am
by CaLLe
Thanks Sir Nigel.

PCS could you corroborate this? And if anything else is needes could you list it? Thank you once again.

Posted: Thu Sep 15, 2005 9:29 am
by pcs
The 150W amp contains MAX PRO III, modified to drive 150W
amp correctly.

SE4 of course, connected to MAX PRO III to enable control over
the same LCD. There's lots of work with this unit, lots of wiring etc,
for example temp sensor from MAX PRO III goes to 150W amp
etc etc.