PCS-Electronics

Hello!

If you've ordered and received PCI MAX RDS and you don't
see the small daughter board on the PCB, you need to install
this small board to attain RDS functionality. RDS boards have been
dispatched to the customers last week and have mostly arrived.

If you haven't received yours yet, please contact us via Email
and we will check whether it has been indeed sent.

Also make sure you install our new PCI MAX 2005 driver
(uninstall old first).

Installation instructions for RDS daughter board:
Simply connect daughter board to the connector on the board. Make
sure it is correctly inserted, when correctly inserted the hole on the pcb
alignes with the hole on the daughter board.
You can use distancer and screw to fix board, if wanted (optional).

There is a 3-pin jumper on the small PCB. Connect the short 3-wire
cable from PCB to this 3-pin jumper. Black wire goes to ground and you
can see which pin is connected to ground on the pcb.

You will see an extra connector on the small board, this can be used
to connect new LCD control units. This unit lets you set frequency,
power and RDS parameters without the PC. LCD is backlighted.

Sorry it took so long, guys. I thank you all for patience and
understanding.

Ok, thx for the Rds board. But now my stereo doesn't work any more. Please help!

It will once you install rds daughter board.

In the mean time you can connect a piece of wire
between middle and black pin on that cable.

Of course I installed the rds board. That is the question. Why doesn't work my stereo any more?

Does RDS work?

Anyway, contact me via email and if you can make a photo
of the pci max board and attach it.

hi i got a pci 2005 and i have not got this new bord sent to me yet !!!! can ya let me no

You only get it with rds boards