Page 1 of 1
Help On Pci 2005
Posted: Sun Jan 30, 2005 2:35 am
by matt_lowestoft
iv had the pci tranmitter for about 3 months and i have a hart beat problem on some channels why is this does anybody no i have tryed a diff port and install it a few times do anybody no how to fix this plz
Posted: Mon Jan 31, 2005 2:22 pm
by pcs
For heart beat problems see doctor immediately.
Remember, PCI MAX is not a pacemaker.
What exactly is a hart beat problem? And how is that
linked to a channel?
Hart beat
Posted: Thu Feb 03, 2005 1:00 pm
by matt_lowestoft
on any channel over 100.00 fm i get a hart beat sound and the quautz lock flashers very fast and it has a horible banging behind it
Posted: Thu Feb 03, 2005 1:06 pm
by pcs
What is a quartz lock?
I'm not really sure what you're trying to say,
I'm totally guessing here.
You can try to expand the vco coil a little bit, its the one
with 5 turns.
Posted: Thu Feb 03, 2005 1:14 pm
by matt_lowestoft
how do u do that the coil thing with 5 twist the quartz lock is when it stops on a freq ie 105.00 and gives u the signal strength
No More Heat beat Problems Thanks But ..
Posted: Sat Feb 12, 2005 3:51 am
by matt_lowestoft
Sorted the heat beat out now but now i have problem when i put the signal power on full or close to full it make a loud hum and some interfearence of some sort can anybody help i have tryed 2 power suplyes
Posted: Sat Feb 12, 2005 6:46 pm
by pcs
probable antenna problem in this case
what can i do to fix this
Posted: Sun Feb 13, 2005 2:46 am
by matt_lowestoft
i quess it has summa to do with the antenna but how can i fix it ? ??
Posted: Sun Feb 13, 2005 2:41 pm
by pcs
Use a better one, look at that GP design for example.
There are many designs in guide section.
You'll have to use coaxial cable to get the RF signal away
from the PC, it will also increase your range considerably.