PCS-Electronics

Hello,
My palette 150w amplifier transistor BLF278 generates a lower power signal at the beginning. I noticed that the power supply generated abnormal noise, as if this one was shorted. The supply voltage is much lower than 27V. I tried with a load resistor and this is the same. The BLF278 ...

hello, i use the same software as you "stereo tool". Can you give me your setup to compar to have a naturel a naturel full range sound please ?
(sorry for my english i'm french)

ok its works but the problem comes a few minutes later, it's random and I have no problem with another program "MICRO MAX RM"1. The file does exist, with the text inside...

Hi,

I ve a problem "Run-time error 62 Input past end of file" when i use winamp with "titlespy" plugin for title in RadioText.
I use PCI card 3000+ with USB port. If i turn off autoactualisation with txt file, no have this bug.

Thanks.

Yes I know but I try to understand and cope as best they could before having to send or pay anything. But I think that's what I'll do ...

I strongly question about i ² C between the LCD and pcimax 3000+

it's normal that the pin 25 (SCL) of μC card max3000, I have a resistance of only 14 ohms, or it is grounded ? I have zero resistance between the ground and the pin 26 (SDA).

Without the max 3000, I ² C signal is generated by ...

yes, the card works perfectly, settings power, frequency, temp, version, RDS data it's ok with USB to pc. All is ok, not the LCD.
Okay for the separate wire but it is nowhere stated that it is necessary to connect the LCD on the 12V unless I am mistaken. I was afraid not seeing the LCD light up ...

2 pictures of new LCD control bought here i've just receive

https://www.pcs-electronics.com/shop/pc ... ccesories/



http://i.imgur.com/pT2Ry.jpg
http://i.imgur.com/dwmTS.jpg

and i use the new daughter rds card v3 for MAX3000+

the new lcd for pci max 3000. it displays "cybermax" and "LED VU METER". It stops after that. And why the power cable connector is separated from the LCD ? It must be welded somewhere ? I weld on the 9 V to power the LCD otherwise it does not work.

Hi,

I just had my LCD and not working with my PCI3000+. It displays "LED VU METER" only. It nothing happens. Over a wire connector should be connected to the power supply? It is off the display connector.

Thank to help me

okay and what are the differences between RDS daughter board v3.0

https://www.pcs-electronics.com/product ... -encoders/

and v2.0

https://www.pcs-electronics.com/product ... -encoders/

I must buy v3.0 for PCI MAX 3000+ ?

Thanks[/url]

Hi Marco !!
Is it possible to use the RDSMAX 4000+ mini with the PCIMAX 3000 using the 19KHz pilot signal "square" emerging from the RDS module connectors for this purpose ? I've UMAX RM1 with the old card PCIMAX 2007 + and I would go to buy the RDSMAX4000.

sorry, i don't understand. i've already the RDS daughter board from model 2007 but i want to plug this in the new PCIMAX 3000.
I'm not talking about "shipping cost"...

So, I can use the RDS daughter board from model 2007 with PCIMAX 3000 or not?

ok but on your web page, is write "RDS daughter board from model 2007+ needs a modification, but it is compatible." so, what is the modification ?

Hi, before purchass PCIMAX 3000, i want to know if RDS module PCI MAX2007 is compatible.
Is it connected by RS232 or USB ?
Then, the stand-alone enclosure for PCIMAX2007 is it compatible with the new PCIMAX 3000 ?
And finish, the older LCD module' PCI MAX 2007 is run with PCIMAX 3000 ?

What are the ...