PCS-Electronics

Hello,

In the doc, the power at the input of the 150W amp it s only 1W. I can up this value to 1.5 W or 2 W ? Without overdrive the PA for get a bit of power in outpout (160 170 W)

Thanks !!!

Hello !! :)

I can use my daughter RDS card with the RDS MAX 3.0 software ? Because the RM1 software is...capricious, especially with the RT function.

And, i have a problem with this card because, after power off, i have the old setup (PS, RT, etc...) and not the new setting :(

Please me help ...

yes but, before, i ve not this problem, i ve changed nothing since. I m just wait a few periode in a cold piece and i take this for install in the same place, with the same setup...

With a booster 15W, i ve a power start with 20 W and down at 14 15 W (temperature up) mesured with a wattmetter. Now, after two week, i ve take my sender witch its stocked in a cellar and the power start with 20 W and down 10 W, :( the power up and down 5 - 10 - 15 W and if i add a ventilator on the ...

I think is near the pll 5526 philips but i would like to work with a schematic the find the "bug" to remplace a composant for a better value of this or simply a solder... I ve found the datasheet of this pll but is difficult for me :-? i thinks is near CP (pin 9) et Vtune (pin 10) with composant ...

"I have this transmitter working in stereo mode but when the music is playing, I can hear a noise that seems to increase especially with low frecuencies and disappears when the music stops. It appears to be as the PLL makes a phase correction."
I ve read this on this forum and its the same noise of ...

ok thanks, but how i can program this with my "com" port ? With a specific program ?

I can use my pci-card 2007 with a LCD control and a RDS card without my computer ? The rds data can be stored in the daughter card and can be transmited with audio signal without any programs and so any computer ? I want to buy a LCD control because have some problems of PCI port with my computer ...

Hi !

For my pci card, this link was the solution, try that :

http://docs.google.com/View?docid=d2frfsz_13gqnmkh

How can be set to 50 or 75uS ?

"There are occasional driver problems" ? Is for problems with the PCI port ? or the quality of modulation ? Is independant driver/sound ?
"the number of card failures has been higher than previous models due to move to lead-free process (damn EU bureaucrats)" So i can ...

thanks but i found this night at 4 am !! with reboot, reinstalls, register...etc etc. it's ok but i ve always this ringing on deep bass. I must more compress this, i think, it's the solution....

yes i'm using sound solution but i ve made my preset. I've an other problem with my driver "unable to open PCI MAX" error message Is not my day :(

okay sorry, for you, and other, i've some pics on deep pics bass with my pci max 2007. I've the same problem with a reduct level of bass but if i want a "like commercial radio sound", i didn't reduce a lot of bass for kill pics on deep bass... help me

yes of course PCI MAX RDS 2007

J'ai relevé notamment ceci dans le forum :

"The old Ultra and 2004 had noisy audio and ringing noises on deep bass notes."

"The 2005 had cleaner audio and no bass ringing, but had incorrect preemphasis settings, making the audio sound strange."

Le souci serait réapparu la version 2007 ?? :cry ...

hello, i'm french and i prefere write in french sorry :P Voila j'ai la PCI CARD 2007 et je rencontre un petit souci de modulation. En effet, avec un son compressé avec le plugin sous Winamp "Sound solution" j'obtiens avec un récepteur un léger son aigue accompagnant chaque "pics" de basses ...